Preassembled connections

Breakout Cable

Versions

• Breakout cable with 2, 4, 8, 12 or 24 single elements assembled with any connector type available
• Sturdy multifiber-cable, with halogen-free and flame-retardant jacket
• Applicable for direct connector assembly
• Cable diameter of single elements 2.0 up to 2.8 mm
• Other numbers of single elements on request
• As indoor, outdoor or universal cable available
• Protection and cable laying tube on request

Advantages

• Breakout cables in any length, pre-assembled on one or both sides
• 100% quality control, each product provided with test certificate
• Time-saving installation
• Assembly on location not necessary
• Direct connection to 19″ distribution technology possible

Fiber Types

• E9/125 μm (OS2)
• G50/125 μm (OM2/OM3/OM4)
• G62.5/125 μm (OM1)

Fanout Cable

Versions

• 8-fold, 12-fold, 16-fold and 24-fold fanout cable assembled with MPO connectors one side and any common connector type on the other side
• Flame-retardant and halogen-free jacket
• Max. fanout length 5 m
• Protection and cable laying tube on request
• Assembly to ribbon cable on request
• Additional options on request

Design – Cable Divider

• Cylindrical metal sleeve to protect the transition to the single breakout cables and to attach the pull cord, made of hollow tubing with strain relief
• Covered with shrinkable tubing for mechanical protection and to maintain the bending radius
• Optional protection and cable laying tube

Application

Advantages

• Fanout cables in any length, one side or both sides pre-assembled
• 100% quality control, each product provided with test certificate
• Time saving during installation
• Assembly on location not necessary
• Direct connection to 19″ distribution technology possible

 Fiber Types

• E9/125 µm (OS2)
• G50/125 µm (OM2/OM3/OM4)
• G62,6/125 µm (OM1)

FO Fanout Cable Direct Split

Versions

• MTP Connector assembled on 4 Duplex Patch Cable I-F(ZN)H 2
• Without Cable Divider for seperation to LC Uniboot or URM NG P2
• Base-8 System, suitable for  40 Gbit (4×10 Gbit) or 100 Gbit (4×25 Gbit)
• Flame-retardant and halogen-free jacket
• Additional options on request

Advantages

• Time saving during installation
• Troublesome strain relief management is not necessary by using duplex patch cables
• By eliminating the rigid dividing element smallest bending radii can be realized
• Additional flexibility in the cable runs because of splitting the cable directly from the connector
• No shelfs for cable reserve needed because of custom-fit assemblies

Fiber Types

• E9/125 µm (OS2)
• G50/125 µm (OM2/OM3/OM4)

Mini Breakout Cable I-V(ZN)H…

Design

• Light, thin and flexible multi-fiber cable with halogen-free and flame-retardant jacket
• Applicable for direct connector assembly

Versions

• Mini breakout cable with 12 single elements assembled with any connector type
• Diameter of single elements: 0.9 mm
• Protection and cable laying tube on request
• Other versions on request

Advantages

• Mini breakout cables in any length, one side or both sides pre-assembled
• 100% quality control, each product provided with test certificate
• Time saving during installation
• Assembly on location not necessary
• Direct connection to 19″ distribution technology possible

Fiber Types

• E9/125 μm (OS2)
• G50/125 μm (OM2/OM3/OM4)
• G62.5/125 μm (OM1)

Multi Loose Tube Cable with Cable Dividing Element

Design

• 2-fold to 144-fold cable dividing element available with any type of fiber optic connector
• Max. fanout cable length: 5 m
• Assembled cable can be delivered on a one-way drum
• Protection and cable laying tube on request
• Indoor, outdoor or universal cable
• Others on request

Advantages

• Multi loose tube cables in any length, one side or both sides pre-assembled
• 100% quality control, each product provided with test certificate
• Assembly on location not necessary
• Direct connection to 19″ distribution technology possible

Fiber Types

• E9/125 μm (OS2)
• G50/125 μm (OM2/OM3/OM4)
• G62.5/125 μm (OM1)

Multi Loose Tube Cable with Cable Dividing Element – gel-free

Design

• LWL Indoorcable available with up to  144 fibers with any type of fiber optic connector (e.g. MTP^®, LC)
• Max. fanout cable length: 5 m
• I-B(ZN)BH nx12…
• Others on request

Advantages

• Multi loose tube cables in any length, one side or both sides pre-assembled
• 100% quality control, each product provided with test certificate
• Assembly on location not necessary
• Direct connection to 19″ distribution technology possible

Fiber Types

• E9/125 μm (OS2)
• G50/125 μm (OM2/OM3/OM4)
• G62.5/125 μm (OM1)

Protection and Cable Laying Tube – Standard

Application

• Breakout cable and multi loose tube cable

Design

• Plastic corrugated tube as connector and breakout cable protection, fixed with shrinkable tubing on the cable jacket behind cable exit
• Outer diameter 25 mm to 45 mm
  (depending on the number of single cables and the assembled connectors)
• The assembled connectors are staggered as a group of 2, 4 or 6
• Standard length of single elements is 100 cm
• Other arrangements and lengths on request
• Pullcord attached at cable jacket and exiting at the front of the protection tubing

Max. Tensile Strength

Tensile strength on the pullcord:

• 300 N for breakout cable and mini breakout cable
• 600 N for multi loose tube cable
• Higher values on request
• Apply tensile load at cable jacket for higher values
  (see data sheet of cable manufacturer)

Protection and Cable Laying Tube – Undetachable

Application

• Mobile use

Design

• Plastic corrugated tube as connector and breakout cable protection, fixed with cable glands at the cable jacket behind the cable exit
• Outer diameter 38 mm to 45 mm
  (depends on the number of single cables and the assembled connectors)
• The assembled connectors are staggered as a group of 2 or 4
• Standard length of the single elements is 100 cm
• Other arrangements and lengths on request
• Pullcord attached at cable jacket and exiting at the front of the protection tubing

Max. Tensile Strength

Tensile strength on the pullcord:

• 300 N for breakout and minibreakout cable
• 600 N for multi loose tube cable
• Higher values on request
• Apply tensile load at cable jacket for higher values
  (see data sheet of cable manufacturer)

Protection and Cable Laying Tube – Reusable

Application

• Mobile use

Design

• Plastic corrugated tube as connector and breakout cable protection, fixed with a screw joint with swivel female thread
• Protection class IP67
• Outer diameter 38 mm or 45 mm
  (depends on the number of single cables and the assembled connectors)
• The assembled connectors are staggered as a group of 2 or 4
• Standard length of the single elements is 100 cm
• Other arrangements and lengths on request

Max. Tensile Strength

• Max. 700 N
• Apply tensile load at cable jacket for higher values
  (see data sheet of cable manufacturer)

Trunk Cable I-V(ZN)HH nx8

Design

• Round cable
• Stranded breakout construction
• Up to 128 fibers in one cable, spread over 16 elements

Properties

• Indoor cable
• Main component is a single element with 8 fibers enclosed with URM P8 multi fiber connector
• High packing density
• Low cable load
• Breakout cable with 4, 8 or 16 single elements
• Singlemode and multimode (OS2, OM2, OM3, OM4) available
• Flame-retardant and non-corrosive jacket
• Convenient installation
• Ideal bending radius for fibers
• Cable length according to customer request

Application

• Laying in false floors or cable routes (backbone cabling)
• Floor cabling is also possible
• Medium to long lines

Thermal Properties

• Transport and storage: -25 to +70°C
• Installation: -5 to +50°C
• Operating: -5 to +70°C

FiberTypes

• E9/125 μm (OS2)
• G50/125 μm (OM2/OM3/OM4)
• G62.5/125 μm (OM1)

Technical Data

Trunk Cable (Multi Jumper Cable) I-V(ZN)HH nx2

Design

• Round cable
• Stranded breakout construction

Properties

• 2, 4, 8, 16, 24 and 32-fold
• Breakout cable, consists of single elements with 2 fibers
• Singlemode and multimode (OS2, OM2, OM3, OM4) available
• Flame-retardant, non-corrosive jacket
• Convenient installation
• Ideal bending radius for fibers
• Cable length according to customer request
• Indoor cable

Application

• Suitable for direct connection of active devices, can also be used alternatively for connecting a device to a patch panel
• Also suitable for cable routes and, thus, for connection of different areas
• Suitable for connection of two data racks as well
• For short to medium distances
• Alternative type for trunk cabling

Thermal Properties

• Transport and storage: -25 to +70°C
• Installation: -5 to +50°C
• Operating: -5 to +70°C

Technical Data

URM Trunk Cable with Cable Dividing Element

Properties

• FO trunk cable assembled with URM P8 connectors on both sides
• Quickly and easily installable in the data center
• Base-8 system, suitable for 40 Gbit (4×10 Gbit) or 100 Gbit (4×25 Gbit)
• High packing density
• Low cable load
• Universal cable: flame retardant and halogen-free jacket
• Comfortable fixing of the trunk cable in subracks, patch- or splice boxes with integrated cable gland on the cable divider

Thermal properties

• Installation -5°C to +50°C
• Operating -5°C to +70°C
• Transportation and storage -25°C to +70°C

Fiber Types

• E9/125 μm (OS2 bend optimized)
• G50/125 μm (OM4 bend optimized))

Technical Data