Other

 Cable Elbows

• 90° bending of cables in all directions without damaging the cable or fiber
• Fast and simple (subsequent) assembly

Cable Labeling Tags

• Attachment of labels
• Available lengths: 17 mm and 34 mm
• Available diameters: 1.85 mm, 2.8 mm and 3.5 mm

Couplers

• Dual window singlemode fused fiber coupler 1×2 to 1×16 available
  in all desired proportion-ratios
• Dual window multimode fused fiber coupler 1×2 available in desired
  proportion-ratios; also available as mode-indifferent lens coupler

WDM

• Wavelength multiplexer on fused fiber coupler basis 1.3/1.5 μm one-,
  two- and three-stage
• High isolation FWDM 1.3/1.5 μm
• Monitor FWDM 1.3 & 1.5/1.61 to 1.64 μm to use in remote fiber test
  systems
• Multimode high isolation FWDM 0.8/1.3 μm
• All components are assembled according to customer specifications

DC Connecting Cable

Specification

• Shielded cable
• Halogen-free and flame-retardant jacket
• With two single wires 2.5mm²
• Single wires provided with insulated wire end sleeves

Advantages

• Simple installation due to flexible design
• Space-saving because of small diameter

Divisible Sealing Elements

Elitex GmbH

• Divisible sealing elements
• Manufacturer: Elitex GmbH
• Gas- and water-tight up to 0.5 bar
• Various tube diameter available

Gabo GmbH

• Divisible sealing elements
• Manufacturer: gabo Systemtechnik GmbH
• Gas- and water-tight up to 0.5 bar
• Various tube diameter available

Rehau AG

• Divisible sealing elements
• Manufacturer: Rehau AG
• Gas- and water-tight up to 0.5 bar
• Various tube diameter available

Dummy Plug

• Closes free slots in SC duplex and URM P8 panels

Dust Caps

• Safe sealing of polished connector end faces (ferrules)

Fiber Optic Attenuator

Application

• Attenuators reduce the optical power transmitted through a fiber
• The most common uses include equalizing power between fibers and
  multi-fiber systems and reducing power to avoid clipping in the receiver
• Plug-in type attenuators are suitable for direct insertion into a
  transmission line

Available Fibers

• E9/125μm (OS2)
• G50/125μm (OM2/OM3/OM4)
• G62.5/125μm (OM1)

Available Connectors

• SC; SC/APC
• FC; FC/APC
• ST
• LC
• MU
• E-2000® (LSH) /E-2000® (LSH) APC

————– Seitenumbruch im PDF ————–

Technical data

House Entry

• Easy and fast installation
• Drilling diameter 25-26 mm
• Horizontal or diagonal installation up to 45°
• For 2x 7 mm or 1x 7-12 mm microducts
• Inner bending radius limitation
• Reliable sealing because of expanding two component resin
• Gas and pressure water tight up to 1 bar according to DIN 18533 W1.1-E, W1.2-E, W2.1-E

Labeling system for 19″ distribution technology

• Labeling system for 19″ distribution technology
• Undetachable labeling field for uniform and clear identification and labeling of 19″ patch panels, splice boxes and other 19″ distribution technology
• Installation next to the 19″ components
• Easy to use thanks to fastening with the enclosed screws
• Can be mounted on the left and right side of the 19 “frame
• Inscriptions individually adaptable
• Exchangeable as needed

Mode Conditioning Patch Cord

Application

• Active components with 1,300 nm modules use transmitter with laser
  characteristics
• Conditional of manufacturing, multimode fibers have adverse
  transmitting characteristics in the core center, since the refractive index
  profile can show discontinuities at this point
• The light feed in this core area causes a heavy DMD (differential
  mode delay) effect which leads to loss in bandwidth and
  range
• Mode conditioning patch cords enable an elimination of this effect by
  connecting the singlemode connector of the duplex cable at
  transmitter side
• A defined offset splice ensures that the light is fed in outside the DMD-prone
  core center of the multimode fiber

Technical Data

• Complies with the IEEE802.3Z Gbit Ethernet 1000Base-LX PMD
  regulations
• EIA/TIA 568 A, ISO 11801, EN 50173
• Suitable as connection cable from active components to passive
  network instead of standard duplex patch cords
• Available combinations: E9/G50/125 μm and E9/G62.5/125 μm
• Assembly with all connectors in our range of products, including small
  form factor connectors
• Freely selectable length (max. 4.0 m)

MTP® Pro Field Tool

• Tool with the possibility to deposite 2 pin exchanger
• Enables change of the polarity of the MTP® Pro Connector
• With this tool and a pin exchanger  it is possible to make a femal MTP® Pro version out of the male connector and the other way around

Unwinding Plate with Brake

• Unwinding device for cable
• Simple adjustable driving pin
• Adjustable brake
• Base plate can be mounted on a table
• For cable bundle  with a core diameter between 70-420 mm
• Weighting 2.1kg it makes the transportation easy

URM Pliers

• Simple installation tool for a quick and uncomplicated assembly of
  URM P2 and URM P8 connectors
• Because of the parallel configuration of the slide shoes, no large
  opening angle of the pliers is necessary for a safe installation of the
  connector
• This enables precise operation in installed cages and modules, even
  if these are already utilized to capacity
• Including adapter for URM P8 connectors

URM Tweezers

• Simple installation tool for a quick and uncomplicated assembly of
  URM P2 connectors
• Because of the parallel configuration of the slide shoes, no large
  opening angle of the tweezers is necessary for a safe installation of the
  connector
• Enables precise operation in installed cages and modules, even
  if these are already utilized to capacity
• Made of steel, gun-metal finished

Velcro tape

• For cable management (re-usable and easy to remove)

Wall Bracket for FTTH Wall-Mounted Fiber Optic Outlet

• • Installed directly on the wall or an flush-mounting box
  • Allows installation with unopend outlet
  • For Outlets with preassembled cable and pre-assembled connectors
  • For simplified FTTH installations
    

Technical data of FTTH Outlet